
Dolphin Electric
Residential Generator Installation in Akron, OH
Serving Akron, OH & surrounding areas
40 years serving Akron area
Dolphin Electric provides home generator installation in Akron, OH, including whole house and standby generators wired to a transfer switch. You get a backup power system sized to your home's circuits and installed to follow Akron's permit and inspection process, by a company with 40 years in business.Call (330) 490-2067 for a free estimate.
If you are looking for home generator installation in Akron, OH, you are probably thinking about the last time the lights went out and stayed out. Storms, high winds and winter weather can cut service to one block or a whole neighborhood, and the furnace blower, sump pump, refrigerator and internet all stop at once.
Dolphin Electric has been in business for 40 years and installs residential and commercial generators. This page explains how a standby system protects an Akron home, what the installation involves, and what to expect from permits.

Home generator installation in Akron: planning for storms and outages
A standby generator sits outside your home on a pad, much like a central air conditioner. It connects to your electrical system through a transfer switch. When utility power drops, the switch senses the loss, the generator starts, and your selected circuits come back on without you touching anything.
That is the main difference from a portable unit. A portable generator needs fuel hauled to it, extension cords run through a window or door, and someone home to set it up in the dark. Running one in the wrong place also creates a carbon monoxide risk.
A permanently installed system is wired, fueled and ready before the storm arrives. If you work from home, rely on medical equipment, keep a finished basement dry with a sump pump, or travel often, automatic backup is the real benefit.
Dolphin Electric handles the electrical side of the job: the transfer switch, the wiring, the connection to your panel and the final testing.

Outage and surge exposure: what happens when power drops and returns
Outages are only half the risk. The moment power drops, and the moment it comes back, can stress the electronics in your house.
The transfer switch is a safety device as well as a convenience. It isolates your home from the utility lines while the generator runs, so power cannot flow backward onto the grid and endanger line crews. It also keeps the two power sources from ever being connected at once. A generator plugged in through a homemade connection skips this protection.
Surge protection is a separate layer. A generator does not stop a voltage spike from a storm-disturbed line or a restoration event. Many homeowners add a whole-home surge protective device at the panel while we are already working on the electrical system. It helps protect appliances, HVAC controls, computers and TVs.
If you are planning a generator, ask us about pairing it with panel-level surge protection so you cover both the outage and the surge.
Sizing a whole house generator for your home
A whole house generator is not one fixed size. The right unit depends on what you need running when the power is out and what your electrical service can handle.
We start with a list of loads: furnace or boiler controls, refrigerator and freezer, sump pump, well pump if you have one, lighting, garage door, and any central air or electric range you want to keep on. Large motor loads such as air conditioners draw extra current when they start, and that affects sizing.
You then choose between two approaches:
- Whole-home backup: most or all circuits stay live.
- Essential-circuit backup: a smaller generator powers only the circuits you select.
Fuel type matters too. Standby generators typically run on natural gas or propane, and your fuel supply, meter capacity and placement all play a part. The generator also needs clearance from windows, doors and walls, so we check the site before recommending a unit.
Older homes: panels and wiring come first
Akron’s housing stock skews old. A 1995 HUD consolidated plan reported that more than 60 percent of units in the city were built before 1950. That does not mean a generator is off the table for an older home, but the electrical system has to be ready for it.
Before we connect a transfer switch, we look at the panel. A crowded or outdated panel, no room for new breakers, or old wiring can all complicate a generator tie-in. In some homes, a panel upgrade is the right first step, and it often pays off beyond the generator by giving you capacity for other upgrades.
We also check grounding and bonding, since a generator system relies on them to work safely. If we find problems, we will tell you what they are and why they matter before you commit to anything.
Planning the panel and the generator together is usually cleaner than doing them as separate projects.
Residential generator installation in Akron: what local homeowners should know
Akron spans dozens of ZIP codes, from 44301 through 44398, and the electrical situation varies by neighborhood. Older homes in Highland Square, North Hill, Firestone Park and Goodyear Heights often need panel evaluation before a generator goes in. Newer or updated homes in areas like Merriman Valley, Ellet and Kenmore may be simpler, though each house still needs its own load review.
Your electric utility is Ohio Edison, a FirstEnergy company. You can choose a competitive supplier for generation, but Ohio Edison still delivers the power, so a generator protects you from delivery outages regardless of supplier.
Permits matter here. Electrical permits for work inside the City of Akron are inspected by the Summit County Department of Building Standards at 1030 E. Tallmadge Ave. Akron also reviews plans separately, and the county cannot issue permits without the city’s approval. That two-part process can affect your schedule, so plan for it early.

How a standby generator installation works
- Call and describe your needs Call (330) 490-2067 and tell us what you want to keep running during an outage and what your home looks like.
- Site and panel review We look at your electrical panel, service, meter location and possible generator placement, and talk through whole-home versus essential-circuit backup.
- Choose the system and plan permits We settle on the generator, transfer switch and any surge protection or panel work, and plan for Akron plan review and county inspection.
- Install and connect The generator goes on its pad, the transfer switch and wiring are installed, and the fuel connection is made by the appropriate qualified party.
- Inspection, testing and walkthrough After inspection, we test the system and show you how it operates so you know what to expect when the power goes out.
Recent Projects in Akron












Home generator installation questions in Akron
How much does home generator installation cost in Akron?
Cost depends on the generator size, the transfer switch type, how far the unit sits from your panel and fuel supply, and whether your panel needs work first. Permit requirements also affect the total. We evaluate your home and give you a clear scope. Call (330) 490-2067 to start.
Do I need a permit to install a standby generator in Akron?
Electrical work inside the City of Akron needs a permit. Summit County Department of Building Standards, at 1030 E. Tallmadge Ave., inspects the work, and the county cannot issue permits without Akron's approval. Akron also reviews plans separately. Confirm the details for your address before work starts.
How long does a generator installation take?
The timeline depends on equipment availability, plan review and permit approval, and the complexity of your wiring and fuel connection. The hands-on installation is usually a small part of the overall schedule. Planning ahead, before storm season, helps you avoid waiting while others rush.
Can you install a whole house generator near me in Akron?
Yes. Dolphin Electric installs residential generators in Akron, including neighborhoods like Highland Square, Firestone Park, North Hill and Merriman Valley. We have been in business for 40 years and handle both residential and commercial generator work. Call (330) 490-2067 to schedule a site review.
What does a transfer switch do?
A transfer switch moves your selected circuits from utility power to generator power when an outage hits, and back again when power returns. It keeps your house isolated from the utility lines, so the generator cannot feed power back onto the grid and endanger line workers.
Does a generator protect my electronics from power surges?
Not by itself. A generator keeps your home running during an outage, but surge protection is a separate device. A whole-home surge protective device installed at your panel adds protection for appliances and electronics. We can quote it alongside your generator installation.
Dolphin Electric
11197 Cleveland Ave NW, Uniontown, OH 44685
- Monday – Friday 7am – 5pm
- Closed Saturday and Sunday
- After Hours Emergency Service Available
